Kā noteikt integrēto griestu LED paneļu apgaismojuma kvalitāti
Salīdzinot ar citām lampām, LED lampām ir izcilas priekšrocības: enerģijas taupīšana, ilgs kalpošanas laiks un zaļa vides aizsardzība. Tomēr LED lampu kvalitāte ir ļoti atšķirīga, un patērētāji nezina, kā izvēlēties? Ņemot vērā pašreizējo nežēlīgo konkurenci plakano paneļu spuldžu tirgus cenās, daudzu standartiem neatbilstošu produktu (profesionāļi tos sauc (zemākas preces, sliktas preces, sliktas preces)) iekļaušana sarakstā ir pārkāpusi LED enerģijas taupīšanas patieso vērtību, ilgu laiku. dzīvība, vides aizsardzība u.c.Lai pielietotu LED tehnoloģiju integrēto griestu jomā, tas ir nopietni ietekmējis integrēto griestu LED paneļu apgaismojuma veselīgu attīstību.Kā atšķirt LED lampu un laternu priekšrocības un trūkumus, jāsāk no šādi aspekti:
1. Look at the overall "power factor of the lamp": a low power factor means that the driving power supply and circuit design used are not good, which will greatly reduce the service life of the lamp. .
The power factor level can be detected with the "power factor meter"! Generally, the power factor of exported LED lamps is required to be above {{0}}.85. If the power factor is lower than 0.5, it should be said that unqualified products or waste products not only have a short lifespan, but also the actual power consumption is about twice as high as the nominal value. That is to say, compared with ordinary energy-saving lamps, it does not save electricity at all! So, this is why LED lamps need to be equipped with high-quality, high-efficiency drive power!
For consumers who do not have a "power factor meter", another method is to use an "ammeter" to detect two similar products with the same nominal power. The more you do not save electricity! At the same time, the current is unstable, which is not good for the life of the lamp bead and the life of the overall lamp!
2. Look at "lamp heat dissipation conditions - material and structure": LED lamp heat dissipation is also very important. Lamps with the same power factor and lamp beads of the same quality, if the heat dissipation conditions are not good, the lamp beads work at high temperature, and the light decay will be Very large, the lamp life will be reduced.
Pašlaik galvenie siltuma izkliedes materiāli ir varš, alumīnijs un dators. Alumīnija loksnes, automašīnu alumīnijs (alumīnija profils, ekstrudētais alumīnijs) ir otrais, lietais alumīnijs ir vissliktākais, un ieliktņa alumīnija siltuma izkliedes efekts ir vislabākais!
3. Look at "lamp bead quality": lamp bead quality depends on chip quality and packaging technology.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
